skip to Main Content
DIRMEIER SYSTEMS GmbH |
Siemensstraße 2 | 92507 Nabburg
E-Mail 09433 - 2059482
  • English
  • German

KEGSWITCH DUO

The basic versions DUO 7 and DUO 10 yet are based on several compatible valves. Without interrupting the dispensing operation, a new keg is activated via a signal when the current keg in use is empty. Optionally, the “smartSCHANK assistant” can receive and display messages about empty kegs.

Beveraging technology Kegswitch DUO (Fasswechsler DUO)

Description

Keg is empty? No hurry!

You know very well what we are talking about: as luck would have it, kegs always run empty, when the waiters and barmen are busy. While tapping a fresh keg you are losing time and money – expensive beer runs down the sink as foam and you have to spend a lot of time until the dispenser is ready to serve a new drink.

KEGSWITCH is the solution. The basic versions DUO 7 and DUO 10 yet are based on several compatible valves. Without interrupting the dispension operation, a new keg is activated via a signal when the current keg in use is empty. Optionally, the “smartSCHANK assistant” can receive and display messages about empty kegs. The stainless steel ball valves, which perform the switching, are the unique feature of KEGSWITCH DUO 7 and KEGSWITCH DUO 10. Advantage: large draw-off flow and cleaning with sponge balls and without dismantling.

While using conventional series connections, older beer is often mixed with fresh beer and you risk contamination. This does not happen with the fully automatic KEGSWITCH products, which do not tap the new keg until the keg in use is empty. Our promise: Always fresh beer and optimal hygiene. “Soft keg switch” also excludes foaming, because the beverage lines always remain filled.

Technical information

Technical information

Dimensions43 x 40 x 13 cm (W x H x D)
InputStandby 0,5 Watt
Electricity24 V AC
Pressure4/8“ 2,5 – 5,5 bar
Keg ports2 x standard 5/8“ AG
Conduit diameter7 mm and 10 mm
Back To Top